Tallinn, Estonia
The upper machinery system consisting of 13 x 5,5kW axis. Safety SIL3 system functions: safe speed, safe position, safe tension. Scene, que and sequence automatic execution. Web based HMI one 21’ control panel.
Lithuania, Klaipėda
Emotron regenerative low harmonic distortion upper machinery system consisting of 40 x 5,5kW axis supplied by 250A AFR. Emotron regenerative low harmonic lower machinery system consisting of 8 x 37,5kW; supplied by 375A AFR. Safety SIL3 system functions: safe speed, safe position, safe tension. Scene, que and sequence automatic execution. Web based HMI 3x 21’ control panels.
Kaunas, Lithuania
Assembly of Compressor refrigeration system, the system is certified to meet the requirements of the RMRS
Kaunas, Lithuania
The programmable logic controller (PLC) has been replaced by a more modern, updated program and visualization.
Lithuania, Vilnius
Six-axis hydraulic platform control system. A working kinematic mathematical model has been implemented. A freely selectable sequence of performed movements is created.
Marijampolė
Old programmable logical controller (PLC) replaced with modern one, old control systems of compressors replaced with new ones and updated SCADA.
Kaunas
Upgrade of cold storage and compressor SCADA software and hardware. Spare controller preparation work.
Liubashevo, Belarus
Peat drying equipment control system: panel design and assembly works, PLC and HMI programming, and commissioning works
Georgia, Tbilisi
Fully automated stage construction and floor lifting system according to the operator's pre-set order of execution. 21 separately movable construction. Fully implemented safety system, meets SIL3 requirements. Integrated regenerative rectifier and filters, low current distortion factor (THDi) achieved No braking resistors, energy consumption reduced
Lithuania, Vilnius
A control system has been designed, assembled and programmed, in which kinematic transformations according to developed mathematical model. The mathematical model we developed generates trajectories for each cable individually by integrating them into a single four-cable control system. This system also implements security and RFID scanning / recording systems.
Latvija, Ryga
Fully automated winch control system. Controlled by a freely changeable operator-ordered execution sequence. There were 2 separate winch systems in the system that could work synchronously. The system has a fully implemented safety system that meets the requirements of SIL3. SIL3 includes motor dynamics: speed, position and load (strain gauges).
Latvia, Ryga
Local control panel. Lifting and lowering of structures is performed locally or from the central panel. Control of electromagnetic brakes on the engine. With the help of the frequency converter, smooth operation of the asynchronous motor was achieved, and the optimal motor acceleration and braking time was determined.
Lithuania, Kaunas
A fully automated Delta robot controlled system. A four-axis delta robot was used in the system. The fourth axis was designed to rotate the product. The control is done using the TwinCat3 software package.
Lithuania, Panevezys
The cable robot system is designed to carry out logistics in production facilities. This system consists of four drums controlled by synchronized servo motors (4x15kW, 40A), four servo motors for product lifting, two servo motors for product coupling, and one drum controlled by power cable feeding. A working kinematic mathematical model has been implemented. The safety system meets the requirements of SIL3.
Kazokiškių k, Lithuania
Supply and installation of a new SCADA computer with an updated SCADA system for gas boiler and air supply systems, including monitoring of newly built or upgraded pumping systems with alarm SMS sending. SCADA programming and start-up works.
Spain, Las Palmas, Fishing vessel "Hunter"
Conditioner compressor, seawater refrigeration system and fish hopper control systems: panel design and assembly work, PLV and HMI programming, and commissioning. Panel certification with the Russian Maritime Register of Shipping.
Kaunas
Recording of instantaneous voltage and current values of all phases of a three-phase network: design and assembly, configuration
Spain, Las Palmas, fishing vessel “Fin Whale”
Control systems for fish bunkers, rasol plate freezers, 3-compressor: design and assembly, PLC, HMI and SCADA programming. Main engine and auxiliary generator monitoring systems: design and assembly, PLC and SCADA programming. Start-up & commissioning works.
Spain, Las Palmas, fishing vessel “Kapitan Morgun”
Control of the entire refrigeration system with a monitoring system in the ship's engine compartment. : design and assembly, PLC, HMI and SCADA programming. Main engine and auxiliary generator monitoring system: design and assembly, PLC and SCADA programming. Start-up and commissioning works.
Lithuania, Kaunas
Fully automated flax raw material processing and preparation system. System failures, quality parameters, speed and performance are passed to the database. With the help of the database, changes in the system are monitored and future possible failures are predicted. Quality parameters are also analyzed, and the assignment of products to one or another batch is traced. Reduced downtime about, improved weighing accuracy, improved production quality.
Spain, Las Palmas, fishing vessel “MIKHAIL VERBITSKIY”
Vessel refrigeration system control, control of the probe winch, accounting of fish briquettes: design and assembly, PLV, HMI and SCADA programming. Start-up & commissioning works.
Spain, Las Palmas, fishing vessel “WASSOU”
Control of two-stage refrigeration compressors: design and assembly, PLC, HMI and SCADA programming. Start-up & commissioning works.
Spain, Las Palmas, fishing vessel “BOKE”
Control of two-stage refrigeration compressors: design and assembly, PLC, HMI and SCADA programming. Start-up & commissioning works.
Svietlyj, Kaliningrad
Control of the entire refrigeration system with two two-stage compressor units controlled by frequency converters of 250 kW each: design and assembly, PLC, HMI and SCADA programming. Start-up and commissioning works.
Spain, Las Palmas, fishing vessel “Marshal Krylov”
Control of the entire refrigeration system with a monitoring system in the vessel's engine compartment. : design and assembly, PLC, HMI and SCADA programming. Main engine and auxiliary generator monitoring system: design and assembly, PLC and SCADA programming. Start-up & commissioning works.
Spain,, Las Palmas, fishing vessel “Ivan Golubiec”
Compressor control systems for seawater cooling and air conditioning systems: design and assembly, PLC, HMI and SCADA programming. Start-up & commissioning works.
Vilnius
Cold storage management system SCADA and PLC modernization works: SCADA programming, PLC renewal, start-up & commissioning works.
Denmark
We participated in the production and assembly of the robot, and developed and implemented complete robot control and safety systems. This robot made it easy to pick up, transport and install display glasses weighing up to 90 kg and measuring 100x300 cm. Full control of the robot was realized from the joystick. Linear and angular trajectories of glass law were realized.
Lithuania, Panevežys
Developed and produced 4 different unique control parameter measurement, long-term parameter measurement, operational and forced parameter stands
Spain, Las Palmas, fishing vessel “Sea Whale”
900 kVar reactive power compensation system. Design, assembly and commissioning.
Spain, Las Palmas, fishing vessel “Grey Whale”
Two reactive power compensation systems of 500 kVar each: Design, manufacture and commissioning.
Spain, Las Palmas, Fishing vessel "Dzintar"
Control of two two-stage refrigeration units, control of air conditioning system unit: design and assembly, PLC and SCADA programming. Start - up and commisioning works
Spain, Las Palmas, fishing vessel “Dzintar”
Control of two two-stage refrigeration units, control of air conditioning system unit: design and assembly, PLC and SCADA programming. Start-up & commissioning work
Žiežmariai
Modernization of 4 refrigeration compressors, refrigeration systems, refrigeration chambers, plate refrigeration appliances: reprogramming of HMI and PLC. Start-up and commisioning works
Spain, Las Palmas, fishing vessel “Atlantic Hermes”
Fish bunker control system, sea water cooling system, control system for two-stage refrigeration units with frequency converters (2 x250 kW): design and assembly, PLC and SCADA programming. Start-up and commisioning works
Spain, Las Palmas, Fishing vessel "Sermilik”
Kitchen cooling system management-Provision: design and assembly, PLC,SCADA programming. Start-up and commisioning works
Sirvydų village
Wastewater pumping station SCADA modernization: SCADA programming, PLC program upgrade
Finland
Compact system for recording and recording wind turbine sensor readings: design and assembly, PLC and HMI programming.
Kaunas
UV line SCADA and controller programming: speed recipe creation and speed transfer to various systems
Spain, Las Palmas, fishing vessel “Kapitan Rusak”
Refrigeration compressor control system with power elements up to 315 kW: design and assembly, PLC and SCADA programming. Start-up and commisioning works
Spain, Las Palmas, Fishing vessel “Marshal Vasilevskij”
Control of the entire refrigeration system with the vessel's engine compartment monitoring system. : design and assembly, PLC, HMI and SCADA programming. Main engine and auxiliary generator monitoring system: design and assembly, PLC and SCADA programming. Start-up and commissioning works
Las Palmas, Spain
Control of entire refrigeration system with vessel's engine compartment monitoring system
Lithuania, Raseiniai
Fully automated product packaging, weighing and quality analysis. The price of the packaging was reduced by 30% because the packaging was formed on site. Achieved performance of 2pcs / s.
Lithunia, Vilnius
Simulation system of natural physical light phenomena A fully automated system that enabled the simulation of light colors in nature according to a predetermined sequence of system execution. The change of light is modeled in the layout of the town. A full spectrum of light was achieved, which allowed simulating daylight, from dawn to dusk including clouds, storms, sunny days, even full moonlight. For this, 6 powerful floodlights were used, where the accuracy of the cover of each floodlight was achieved with an accuracy of 0.1 degree.
New Zealand
Freon F407f gas concentration detection and signaling system : panel design and assembly works, PLV and HMI programming. Panel certification in the Russian Maritime Register of Shipping.
Spain, Las Palmas, Fishing vessel "Dzintar"
Trawl system control panel design and assembly, PLC and HMI programming, as well as wiring, start-up commisioning. The control system of the trawling system has been modernized with two boom motors and one generator connected in series.
Spain, Las Palmas, fishing vessel “Fishing Success”
Refrigeration compressor and water cooler control: design, panel assembly, PLC and HMI programming, start-up & commissioning works.
Spain, Las Palmas, fishing vessel “Kapitan Rusak”
Refrigeration compressor and water cooler control: design, panel assembly, PLC and HMI programming, start-up & commissioning works.
Spain, Las Palmas, fishing vessel “DzintarsZeme”
Control of two two-stage refrigeration units, control of air conditioning system unit: design and assembly, PLC and SCADA programming. Start-up and commissioning works